Nonlinear Responses of a Magnetoelastic Beam in a Step-Pulsed Magnetic Field

A theoretical study is carried out on the dynamics of a magnetoelastic beam being in a step-pulsed magnetic field. For this aim, the magnetic potential and elastic energies are determined for the beam and partial differential equations are established according to Hamilton's principle. It is proven that the magnetoelastic beam can give a variety of complex behavior in the case of step-pulsed field excitations. An intermediate regime of two-well chaos is observed. Theoretical findings were found to be in a good agreement with the experimental results for the specific system parameters. On leave from Institute of Physics, University of Bayreuth, 65440 Bayreuth, Germany An erratum to this article is available at .     

滚滑工况弹流反常温度场的研究

研究了弹流反常温度场的形成机理及影响因素，指出入口温升是压缩功发热和逆流剪切热所致，而出口局部低温是负压缩功吸热的结果，出口温度的再次微幅上升则是压缩功消失后剪切热作用的结果．研究结果表明，入口温升随载荷的增加而增大，随卷吸速度的增加显著升高而几乎与滑滚比无关；在高速小滑滚比工况下，接触区的最高温度有可能出现在入口位置；入口温升增加了材料在工作中经受高温的次数，对其接触疲劳寿命有不利影响；在保证润滑性能的前提下，适当减少供油量可以减小逆流，从而降低入口温升。     

双相介质参数反演的混沌搜索方法

混沌运动能在一定的范围内按自身的规律不重复地遍历所有状态。利用这个特点 ,本文将混沌运动引入到双相介质参数反问题的研究中。首先利用边界元方法实现了由介质参数到地表位移的非线性映射 ,然后通过建立合成位移与实测位移的相关函数将参数识别问题归结为优化问题 ,最后利用混沌运动指导优化搜索求得介质参数。算例结果表明了混沌搜索方法用于双相介质参数反演问题的可行性和有效性     

含球形空腔或刚性夹杂的中厚圆板在弯曲变形时的弹性场

本文将空间轴对称问题的Папковиц-Neuber通解用复变量广义解析函数表示,推导出用复变函数法求解空间轴对称问题的基本公式,并以此为工具求得了含球形空腔或刚性夹杂的中厚圆板在轴对称弯曲变形时的完全解.     

架设阶段悬索桥静力问题的随机有限元分析

架设阶段的悬索桥不仅具有显著的几何非线性行为，而且存在材料特性的变异。本文建立了以增量形式表达的非线性摄动法随机有限元列式，并编制了悬索桥静力分析程序ＳＮＡＰ。针对一座国内在建的悬索桥，计算了该桥在某一施工阶段考虑缆索弹性模量随机性时主梁跨中点位移的变化。结果表明，材料随机性的影响十分明显。     

压力场中光纤应变测量方法研究

本文对压力场环境下的光纤应变测量方法进行了研究，在理论上分析了由于测试环境的压力变化产生虚假应变的原因，提出了采用补偿的方法消除虚假应变。通过具有补偿功能的马赫－泽得干涉系统对应变场进行了测量，证明了补偿法的可靠性，为光纤应变测量方法向实用化转变进行了有益的探讨。     

Dual-parameter elastic-plastic fracture criterion of metals and alloys in the plane strain case

In recent years, some investigators discussed the applicability of the HRR theory for engineering materials based on the results of numerical analyses and experimental studies. In the present paper, the finite element method is employed to analyze the crack tip fields of the engineering elastic-plastic material with a variety of geometry configurations of cracked specimens from elastic state to intensely general yielded state in the plane strain case. The results indicate that the HRR theory loses its validity of application for engineering elastic-plastic materials in the plane strain case. The reasons for this are analyzed. A dual-parameter fracture criterion is suggested for this case.     

外偶极电场作用下H_2O,D_2O和T_2O的可逆分解电压

采用密度泛函B3P86方法和6-311++G(3df,3pf)基组,计算了在-0.05～0.05a.u.外偶极电场作用下,H2O,D2O,T2O,H2,D2,T2,O2的电子能量、核运动能量和熵值,在此基础上通过计算H2O(g)→H2(g)+O2(g)、D2O(g)→D2(g)+O2(g)、T2O(g)→T2(g)+O2(g)的焓变ΔH、熵变ΔS、Gibbs函数变化ΔG,最后得到了H2O,D2O,T2O的可逆分解电压Er.计算结果表明,外偶极电场存在时,H2O,D2O,T2O的Gibbs自由能变ΔG和可逆分解电压Er都有明显的变化,当外偶极电场正方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性增加;当外偶极电场负方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性减小;在相同外偶极电场作用下,Gibbs自由能变ΔG和可逆分解电压Er随H2O,D2O,T2O依次增加.     

Monitoring of metabolic profiling and water status of Hayward kiwifruits by nuclear magnetic resonance

The metabolic profiling of kiwifruit (Actinidia deliciosa, Hayward cultivar) aqueous extracts and the water status of entire kiwifruits were monitored over the season (June-December) using nuclear magnetic resonance (NMR) methodologies. The metabolic profiling of aqueous kiwifruit extracts was investigated by means of high field NMR spectroscopy. A large number of water-soluble metabolites were assigned by means of 1D and 2D NMR experiments. The change in the metabolic profiles monitored over the season allowed the kiwifruit development to be investigated. Specific temporal trends of aminoacids, sugars, organic acids and other metabolites were observed.The water status of kiwifruits was monitored directly on the intact fruit measuring the T₂ spin-spin relaxation time by means of a portable unilateral NMR instrument, fully non-invasive. Again, clear trends of the relaxation time were observed during the monitoring period.The results show that the monitoring of the metabolic profiling and the monitoring of the water status are two complementary means suitable to have a complete view of the investigated fruit.     

Effect of the preparation conditions on the formation of asymmetric poly(vinylidene fluoride) hollow fibre membranes with a dense skin

Integrally skinned asymmetric poly(vinylidene fluoride) hollow fibre membranes were prepared and characterized. The effects of phase inversion methods (dry-wet or wet) and spinning conditions, such as the type of solvent (NMP, DMAc), the concentration of polymer in dope solution, temperature of the external coagulation bath and the composition of the inner coagulant on the morphology and on the formation of a dense skin layer were investigated. The structure of the membranes was analyzed by scanning electron microscopy and the gas permeation properties with six different gases (He, H₂, N₂, O₂, CH₄ and CO₂) were measured at 25 °C to confirm the integrity of the selective skin layer. Under the proper conditions highly selective and permeable PVDF hollow fibre membranes were thus obtained by dry-wet spinning of a 30 wt.% PVDF solution in DMAc, using hot water (50 °C) as the external coagulant and a bore fluid of pure water as the internal coagulant. The best membrane had a selective outer skin with an effective thickness of approximately 0.2 μm. The ideal selectivity of the hollow fibres approached or even exceeded the intrinsic ideal selectivity of a dense PVDF film, for instance the selectivity for He over N₂ was 86.2 for the hollow fibre, whereas it was 83.5 for a dense PVDF reference film. DSC and FT-IR/ATR analysis indicated a higher fraction of the β-crystal phase in the selective skin and a high overall crystallinity than in the melt-processed film. The latter explains the relatively high selectivity and low permeability of the membranes. Intrinsic polymer properties make the membranes also suitable for vapour transport than for gas separation.